Sunday, October 26, 2014

ISSU DOWNGRADE/UPGRADE STEPS ON 4500X VSS

ISSU DOWNGRADE FROM 3.5.2E TO 3.4.3SG 


VSS-4500#dir bootflash:
Directory of bootflash:/

96962  -rw-   167665848   Sep 8 2014 13:09:53 +03:00  cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin
96963  -rw-        4352  Sep 17 2014 16:39:17 +03:00  startup-config.saved_vs-20140917-133917
96964  -rw-     2567460  Oct 22 2014 14:00:40 +03:00  cat4500-e-ios-promupgrade-150-1r-SG10
96965  -rw-   122029136  Oct 26 2014 15:48:51 +02:00  cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin

1692037120 bytes total (1399308288 bytes free)
SB_riga-ag8-vss-4500#dir sl
SB_riga-ag8-vss-4500#dir sla
SB_riga-ag8-vss-4500#dir slavebo
SB_riga-ag8-vss-4500#dir slavebootflash:
Directory of slavebootflash:/

48482  -rw-   167665848   Sep 8 2014 13:13:04 +03:00  cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin
48483  -rw-        4199  Sep 17 2014 16:34:03 +03:00  startup-config.converted_vs-20140917-133339
48484  -rw-     2567460  Oct 22 2014 14:03:39 +03:00  cat4500-e-ios-promupgrade-150-1r-SG10
48485  -rw-   122029136  Oct 26 2014 16:10:02 +02:00  cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin

1692037120 bytes total (1399304192 bytes free)
SB_riga-ag8-vss-4500#    



VSS-4500#show bootvar
BOOT variable = bootlfash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin,1;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102

Standby BOOT variable = bootlfash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin,1;
Standby CONFIG_FILE variable does not exist
Standby BOOTLDR variable does not exist
Standby Configuration register is 0x2102

VSS-4500#show switch  virtual

Executing the command on VSS member switch role = VSS Active, id = 1


Switch mode                  : Virtual Switch
Virtual switch domain number : 1
Local switch number          : 1
Local switch operational role: Virtual Switch Active
Peer switch number           : 2
Peer switch operational role : Virtual Switch Standby

Executing the command on VSS member switch role = VSS Standby, id = 2


Switch mode                  : Virtual Switch
Virtual switch domain number : 1
Local switch number          : 2
Local switch operational role: Virtual Switch Standby
Peer switch number           : 1
Peer switch operational role : Virtual Switch Active
SB_riga-ag8-vss-4500#
SB_riga-ag8-vss-4500#



VSS-4500#show switch  virtual slot-map

Executing the command on VSS member switch role = VSS Active, id = 1


Virtual Slot to Remote Switch/Physical Slot Mapping Table:

Virtual    Remote      Physical   Module
Slot No    Switch No   Slot No    Uptime
---------+-----------+----------+----------
  1         1              1        02:59:00
  2         1              2          -   
  3         1              3          -   
  4         1              4          -   
  5         1              5          -   
  6         1              6          -   
  7         1              7          -   
  8         1              8          -   
  9         1              9          -   
  10        1              10         -   
  11        2              1        02:59:40
  12        2              2          -   
  13        2              3          -   
  14        2              4          -   
  15        2              5          -   
  16        2              6          -   
  17        2              7          -   
         

Executing the command on VSS member switch role = VSS Standby, id = 2


Virtual Slot to Remote Switch/Physical Slot Mapping Table:

Virtual    Remote      Physical   Module
Slot No    Switch No   Slot No    Uptime
---------+-----------+----------+----------
  1         1              1        03:00:01
  2         1              2          -   
  3         1              3          -   
  4         1              4          -   
  5         1              5          -   
  6         1              6          -   
  7         1              7          -   
  8         1              8          -   
  9         1              9          -   
  10        1              10         -   
  11        2              1        02:59:22
  12        2              2          -   
  13        2              3          -   
  14        2              4          -   
  15        2              5          -   
  16        2              6          -   
  17        2              7          -   
  18        2              8          -   
  19        2              9          -   
  20        2              10         -   
VSS-4500#





VSS-4500#show redundancy
Redundant System Information :

------------------------------
       Available system uptime = 2 hours, 28 minutes
Switchovers system experienced = 0
              Standby failures = 0
        Last switchover reason = none

                 Hardware Mode = Duplex
    Configured Redundancy Mode = Stateful Switchover
     Operating Redundancy Mode = Stateful Switchover
              Maintenance Mode = Disabled
                Communications = Up

Current Processor Information :
------------------------------
               Active Location = slot 1/1
        Current Software state = ACTIVE
       Uptime in current state = 2 hours, 26 minutes
                 Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.05.02.E RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 12-Mar-14 04:25 by prod_re
               BOOT = bootlfash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin,1;
        Configuration register = 0x2102

Peer Processor Information :
------------------------------
              Standby Location = slot 2/1
        Current Software state = STANDBY HOT
       Uptime in current state = 2 hours, 25 minutes
                 Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.05.02.E RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 12-Mar-14 04:25 by prod_
               BOOT = bootlfash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin,1;
        Configuration register = 0x2102



VSS-4500#  



VSS-4500#show issu state de

                               Slot = 11
                           RP State = Standby
                         ISSU State = Init
                     Operating Mode = Stateful Switchover
                      Current Image = flash1:/USER/cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin
          Pre-ISSU (Original) Image = N/A
         Post-ISSU (Targeted) Image = N/A




AFTER ISSU LOADVERSION


VSS-4500#show issu state detail
                               Slot = 1
                           RP State = Active
                         ISSU State = Load Version
                     Operating Mode = Stateful Switchover
                      Current Image = bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin
          Pre-ISSU (Original) Image = bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin
         Post-ISSU (Targeted) Image = bootflash:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin

                               Slot = 11
                           RP State = Standby
                         ISSU State = Load Version
                     Operating Mode = Stateful Switchover
                      Current Image = bootflash:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin
          Pre-ISSU (Original) Image = bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin
         Post-ISSU (Targeted) Image = bootflash:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin

VSS-4500#



AFTER ISSU RUNVERSION

VSS-4500#issu runversion 11 slavebootflash:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin

VSS-4500#show redundancy
Redundant System Information :

------------------------------
       Available system uptime = 1 hour, 23 minutes
Switchovers system experienced = 1
              Standby failures = 0
        Last switchover reason = user_forced

                 Hardware Mode = Duplex
    Configured Redundancy Mode = Stateful Switchover
     Operating Redundancy Mode = Stateful Switchover
              Maintenance Mode = Disabled
                Communications = Up

Current Processor Information :
------------------------------
               Active Location = slot 2/1
        Current Software state = ACTIVE
       Uptime in current state = 1 hour, 12 minutes
                 Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.04.03.SG RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 19-Dec-13 14:51 by prod_r
               BOOT = bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin,1;
        Configuration register = 0x2102

Peer Processor Information :
------------------------------
              Standby Location = slot 1/1
        Current Software state = STANDBY HOT
       Uptime in current state = 2 minutes
                 Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.05.02.E RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 12-Mar-14 04:25 by prod_
               BOOT = bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin,1;
        Configuration register = 0x2102



VSS-4500#show issu state detail
                               Slot = 11
                           RP State = Active
                         ISSU State = Run Version
                     Operating Mode = Stateful Switchover
                      Current Image = bootflash:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin
          Pre-ISSU (Original) Image = bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin
         Post-ISSU (Targeted) Image = bootflash:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin

                               Slot = 1
                           RP State = Standby
                         ISSU State = Run Version
                     Operating Mode = Stateful Switchover
                      Current Image = bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin
          Pre-ISSU (Original) Image = bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin
         Post-ISSU (Targeted) Image = bootflash:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin





VSS-4500#show  issu rollback-timer
     Rollback Process State = In progress
   Configured Rollback Time = 00:45:00
    Automatic Rollback Time = 00:33:47


VSS-4500#



ACCEPT VERSION


VSS-4500#issu acceptversion 11 boo
VSS-4500#$:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin     
% Rollback timer stopped. Please issue the commit version command.


VSS-4500#show  issu rollback-timer                        
     Rollback Process State = Not in progress
   Configured Rollback Time = 00:45:00



COMMIT VERSION

VSS-4500#show redundancy
Redundant System Information :

------------------------------
       Available system uptime = 1 hour, 37 minutes
Switchovers system experienced = 1
              Standby failures = 1
        Last switchover reason = user_forced

                 Hardware Mode = Duplex
    Configured Redundancy Mode = Stateful Switchover
     Operating Redundancy Mode = Stateful Switchover
              Maintenance Mode = Disabled
                Communications = Up

Current Processor Information :
------------------------------
               Active Location = slot 2/1
        Current Software state = ACTIVE
       Uptime in current state = 1 hour, 26 minutes
                 Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.04.03.SG RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 19-Dec-13 14:51 by prod_r
               BOOT = bootflash:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin,12;bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin,1;
        Configuration register = 0x2102

Peer Processor Information :
------------------------------
              Standby Location = slot 1/1
        Current Software state = STANDBY COLD-CONFIG
       Uptime in current state = 0 minute
                 Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.04.03.SG RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 19-Dec-13 14:51 by prod
               BOOT = bootflash:cat4500e-universal.SPA.03.04.03.SG.151-2.SG3.bin,12;bootflash:cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin,1;
        Configuration register = 0x2102


VSS-4500#

2 comments: